Bento Box Chambered Barrel Liner

These barrel liner sections are sized for the standard length and the longer threaded length bento box printed barrels.

The liner has been chambered and is ready to epoxy into a printed barrel sleeve.

The exterior has been given a coarse sanded texture to optimize adhesion with epoxy. It is advised that the barrel be cleaned with acetone or isopropyl alcohol prior to installation.

Barrel will still need to be filed to finish length and have the extractor groove filed after installation.

PLEASE BE AWARE, WHEN CUTTING YOUR EXTRACTOR GROOVE DO NOT CUT BEYOND THE INSIDE WALL OF THE LINER. FOLLOW CONTOUR OF YOUR PRINTED BARREL SLEEVE. THE EXTRACTOR DOES
NOT NEED MUCH REMOVED TO SUCCESSFULLY EXTRACT.